24MM planetary gear motor DC high ratio large torque

The 24MM planetary gear motor has a backlash of only 1.2°, allowing it to operate with virtually no backlash, providing excellent positioning accuracy and fast response for applications requiring precise control. During continuous operation, the maximum allowable input speed of the motor can reach 8000rpm, ensuring stable performance under high-speed operation. In addition, the motor’s radial clearance is ≤0.04mm and axial clearance is ≤0.3mm, further enhancing its reliability in high-precision applications.

Customized Your Gear Motor

No.of stages	1~10PCS	10~50PCS	50~200PCS	200~500PCS	≥500PCS
1	90USD	80USD	65USD	50USD	Negotiation
2	100USD	85USD	70USD	55USD	Negotiation
3	105USD	90USD	80USD	65USD	Negotiation
4	115USD	100USD	85USD	70USD	Negotiation

Outer Diameter:	24mm	Product of Origin:	Guangdong ,China
Brand:	SigGear /OEM / ODM	Motor Type:	Brush ，Brushless , Coreless .Stepper.etc
Protect Level:	Basic ,Totally Enclosed , Water proof or customized request	Application Field:	Customer Request
Life Time Warranty:	At least 2 years	Structure:	Spur Gearbox , Planetary , Worm , Cycloidal, Harmonic
Material:	Metal and Plastic	Certification:	ISO9001 ITAF16949

Product Description

Planetary reducer is a widely used industrial products, the reducer small size, light weight, high bearing capacity, long service life, smooth operation, low noise. It has the characteristics of power shunt and multi-tooth meshing.

Progression: The number of sets of planetary gears. Because one set of planetary gears cannot meet the larger transmission ratio, sometimes two or three sets are needed to meet the requirements of supporting the larger transmission ratio. Due to the increase in the number of planetary gears, the length of the 2 or 3 stage reducer will be increased, and the efficiency will be decreased.

Return gap: The output end is fixed, the input end rotates clockwise and counterclockwise, so that the input end produces rated torque +-2% torque, the input end of the reducer has a small angular displacement, this angular displacement is the return gap. The unit is "minute", that is, one sixtieth of a degree, also known as the back gap.

Gearbox Specification

Housing material	Steel
Gearwheel material	Steel
Bearing at output	Ball Bearings
Radial load（10mm from flange）	≤3.0kgf
Shaft axial load	≤1.0kgf
Radial play of shaft	≤0.04mm
Thrust play of shaft	≤0.3mm
Backlash，at no-load	≤1.2°
Max permissible speed at continuous working	≤8000RPM
Operating temperature range	－40~120℃

Adapted Motor

Nominal(VDC)	3 ～ 36VDC
DC motors	Suitable for DC motors with power less than 28W,When the motor cannot meet the installationrequirements of the reducer,it needs to be negotiated separately.

Technical ilustration

Technical Parameter

Note: Only part of the data is presented in the table. If there is any need, please communicate with the project leader to accept the design and development of special specifications.

WHY CHOOES OUR PRODUCTS

Quality Assurance

Different needs to provide different design, committed to providing high-end precision transmission system solutions
Production base

More than 13000 square meters. 11 assembly lines ,Stable and efficient, sufficient supply
Advanced equipment

Equipment imported from Switzerland, Germany and Japan. High-precision production and inspection
CUSTOM ON DEMAND

Strictly design and produce by our customer's detail parameter requirement.